 |
Unmatched quality. TapeTech has been providing the highest quality tools in the industry for over 20 years. Durability and ease of maintenance are designed into TapeTech tools so you can expect them to perform when needed. You can trust that TapeTech tools are the easiest to maintain and most dependable tools available.
New technology. TapeTech's engineers are constantly making improvements and developing innovations to compliment your TapeTech tools. If there is a more efficient method to finish drywall, TapeTech is certain to find it. TapeTech engineers are at work to make your job easier all the time. |
| |
|
| Automatic Taper |
 |
Simultaneously applies tape and correct amount of joint compound for all drywall joints - drastically improves taping efficiency.
- Stainless steel and gold anodized aluminum for light weight and durability.
- Reaches 10-ft (3m) ceilings without stilts or scaffolding.
- Smoothest operating automatic taper available.
- Designed to be easily cleaned and maintained.
|
| |
| Stainless Steel Corner Roller |
 |
Used after the Corner Roller, or with the udRunner or Corner Applicator to finish joints by feathering both edges in one pass.
- Spring-loaded action compensates for imperfect angles.
- TapeTech provides 3 versions of this convenient tool.
- 3" (75mm) EasyRoll Adjustable, 2" (50mm) and 3" (75mm) standard.
|
| |
| Corner Finisher |
 |
Spring-assisted pressure plate reduces effort required to apply joint compound and feather the edges in one pass - coating joints has never been easier.
- TapeTech is the only manufacturer providing this innovative design.
- Less worker effort required.
- Large joint compound capacity.
|
| |
| MudRunner™ |
 |
Automatically dispenses the proper amount of joint compound and feathers the edges in one pass.
- Three box sizes available — 7”, 10” and 12”
(175mm, 250mm, 300mm).
- User adjustable blade holder fine tunes the crown for proper compound distribution.
- Standard and high-capacity EasyClean™ versions.
|
| |
| Power Assist™ Box |
 |
Supplies joint compound to the corner tools
- Attaches directly to Corner Finishers and Mud Heads. • Ball joint allows flexible positioning.
- Sizes - 7" (175mm) & 8" (200mm).
- Reach high angles safely from the floor.
|
| |
| Extruded Flat Boxes |
 |
The fast, light and dependable way to fill your TapeTech tools with joint compound.
- Gold anodized for added durability.
- Low friction components provide increased suction.
- Attachments allow filling of all TapeTech tools.
- Coarse and fine screens available.
- EasyClean feature.
|
| Outside Corner Rollers |
 |
Smaller, lighter version of the flat boxes used to cover nail or screw head depressions, removing the excess joint compound at the same time.
- Fills an entire row of dimples in one pass.
- Two tool sizes to work on any job - 2" (50mm) and 3" (75mm).
- Rugged stainless steel construction.
- Uses skid instead of wheels to extend blade life.
|
| |
| Support Handles |
 |
Extends the reach of the Automatic Taper by 2 feet (0.6m).
- Quick and easy installation.
- When attached to the Automatic Taper, high ceilings can be reached without stilts or scaffolding.
|
| |
|
| Corner Applicator |
|
The stainless steel corner roller attaches to the “HR” support handle. It is used to embed the tape firmly into the corner in preparation for using the corner finisher
- Lightweight and fast tool to bed the tape into inside corners forming a sharp corner at the same time.
- Unique rollers are the easiest to clean.
- Can embed tape in 10-foot high (3m) corners while standing on the floor.
|
| |
| EasyClean® Box |
 |
TapeTech's new extendable brake handle is the strongest extendable brake handle available.
Independent test results available upon request.
• A new profile lightens the tool while increasing the strength nearly twice as much.
• The longest extension brake handle available - from 41" (1.041m) to 63" (1.6m).
• Brake grip adjuster - adjusts the lever to fit any grip size with a few turns.
• The extension adjuster is situated for easy actuation without interfering with the operator's hands.
|
| |
| EasyClean® Pump |
 |
Serves as the fill connection EasyClean® Pump and TapeTech Automatic Taping and Finishing Tools.
• Gooseneck used to fill automatic taper.
• Filler used to fill Flat, EasyClean® and Power Assist boxes, nail spotters, corner applicators, and the MudRunner
|
| |
| Nail Spotter |
 |
The brake handles provide the means to properly control the Flat, EasyClean® and Power Assist boxes.
Engage the brake lever to stop the box from pivoting so it can be cleanly swept off the joint. Available in four lengths: #8034TT is 34" (.86m), #8042TT is 42" (1.06m), #8054TT is 54" (1.4m), and #8072TT is 72" (1.8m)
|
| |
| Xtender™ Handle |
|
Delivers joint compound to corner tools with precision control and low effort — an easier and faster way to finish high-quality corners.
- Only the leader, TapeTech, has this innovative design.
- Twist-grip flow control works equally well for right-handers or left-handers.
- Reaches high angles from the floor.
|
| |
| Taper Extension |
 |
The Outside Corner Rollers are used to remove the excess joint compound from beneath the freshly applied cornerbead.
The Outside Corner Rollers are available with two caster profiles. One profile (17TT) has long casters and is for plastic-reinforced cornerbead.
The other profile (17TTE - pictured) has shorter casters and is best-suited for use with steel-reinforced cornerbead.
|
| |
| Mud Heads |
 |
The 6 profiles of MudHeads are attached to the MudRunner for applying a base coat prior to installing cornerbead and are designed to work with nearly all shapes - outside 90-degree (16TT) , inside 90-degree (16TT90) , outside offset angle (16TTOO), inside offset angle (16TTIO), bullnose (16TTBN), and a flat profile (16TTL) for miscellaneous use such as L-trim. The MudHeads make installing cornerbead simpler than ever |
